EN 854 2TE Hydraulic Hose

EN 854 2TE hydraulic hose is specifically engineered for low to medium-pressure hydraulic systems where increased durability and flexibility are required. Its double-layer fiber braided reinforcement ensures reliable working pressure and extended service life, even under frequent bending or harsh environmental exposure. This hose is widely used in agricultural machinery, material handling equipment, industrial systems, and hydraulic return or suction lines. With its oil-resistant inner tube and weather-protected cover, EN 854 2TE provides a cost-effective and dependable solution for a variety of fluid transfer applications.

hose info

EN 854 2TE hydraulic hose is reinforced with two layers of high-strength synthetic fiber braid, designed for low to medium-pressure hydraulic applications. Compared to EN 854 1TE, it offers higher pressure capacity, improved durability, and reliable performance in return, suction, and hydraulic oil lines.

Specification

Structure

Features

Dual fiber reinforcement

Provides greater strength and higher pressure capacity than 1TE.

Enhanced durability

Withstands tougher operating conditions with improved service life.

Excellent flexibility

Simplifies routing in compact hydraulic systems and machinery.

Oil and weather resistance

Maintains performance under exposure to hydraulic fluids, ozone, and outdoor environments.

Reliable medium-pressure performance

Ideal for return and suction lines requiring higher safety margins.

Parameters

EN 854 2TE Hose Specification

Type /Spec.	Metric Sizes (mm)	Inch Sizes (inch)	SAE Spec. 1/16	Hose I.D.		Hose O.D.		Max Work Pressure		Burst Pressure		Min Bend Radius		Weight
Type /Spec.	Metric Sizes (mm)	Inch Sizes (inch)	SAE Spec. 1/16	Min	Max	Min	Max	mpa	psi	mpa	psi	inch	mm	kg/m
2TE-06	6	1/4	-4	6.2	6.9	12.6	14.2	7.5	1088	30	4351	1.57	40	0.13
2TE-08	8	5/16	-5	7.7	8.5	14.1	15.7	6.8	986	27.2	3946	1.97	50	0.15
2TE-10	10	3/8	-6	10.0	10.8	15.7	17.3	6.3	913	25.2	3655	2.36	60	0.18
2TE-13	12.5	1/2	-8	12.3	13.5	18.7	20.7	5.8	841	23.2	3364	2.76	70	0.22
2TE-16	16	5/8	-10	15.5	16.7	22.9	24.9	5.0	715	20	2900	3.54	90	0.29
2TE-19	19	3/4	-12	18.6	19.8	26.0	28.0	4.5	652	18	2610	4.33	110	0.37
2TE-25	25	1	-16	25.0	26.4	32.9	35.9	4.0	580	16	2320	5.12	130	0.53
2TE-32	31.5	1.1/4	-20	31.4	33.0	41.0	44.5	3.5	508	14	2030	5.51	140	0.70

FAQs

What industries commonly use EN 854 2TE hoses?

EN 854 2TE hoses are widely used in agriculture, construction, industrial hydraulics, and material handling equipment.

How does the flexibility of EN 854 2TE benefit installation?

The excellent flexibility allows easier routing in tight spaces, reduces stress on fittings, and minimizes installation time.

Can EN 854 2TE replace steel wire braided hoses?

It can replace steel braided hoses in certain low to medium-pressure systems, but for high-pressure or heavy-duty use, steel wire reinforced hoses (e.g., EN 853 series) are recommended.

What limitations should be considered when using EN 854 2TE hoses?

Limitations include restricted suitability for high-pressure impulse applications, lower maximum pressure compared to steel wire reinforced hoses, and reduced performance under very high pulsation frequencies. For such applications, steel wire braid hoses (EN 853 series) are recommended.

How does the dual fiber braid reinforcement influence pressure performance and safety factor?

The two synthetic fiber braids significantly increase working pressure compared to 1TE. According to EN 854 standards, the burst pressure is at least 4 times the working pressure, ensuring a safe margin for hydraulic applications.

In what scenarios should EN 854 2TE be selected over EN 853 1SN/2SN wire braided hoses?

EN 854 2TE is preferred when weight reduction, high flexibility, and cost efficiency are more important than very high working pressure. For example, in agricultural machinery return lines or light-duty hydraulic circuits where space and flexibility matter, 2TE is more suitable.